Extend the Life of Your Deck Frame!

FastenMaster Deck Frame Coating extends the life of your deck substructure by creating a protective moisture barrier that deters wood rot and decay on deck joists, beams, ledgers, stair stringers and posts.

Coverage 1 gallon bucket = 450 LF

APPLICATION: FastenMaster’s Deck Frame Coating can be applied using a standard bristle paint brush or a heavy duty, 3/8" nap roller. It is recommended to apply a generous and consistent single layer of coating. • Apply in temperatures above 40 °F /4 °C. Freeze/thaw stable when cured. • Product is in a liquid state, protect from freezing. If product was frozen, allow 12 hours of thaw time before use. • On average, decking can be installed after 20 minutes of drying time.** • Full cure in 24 hours @ 70°F/21°C and 50% humidity.** • Do not apply to dirty/contaminated or wet surfaces. • Coating remains slightly tacky when cured. CLEAN UP: Clean skin or building materials using soap & warm water. Mineral oil or Baby Oil can be used. It is recommended to review the decking manufacturer’s warranty before using cleaners. CAUTION: Keep out of reach of children & pets. Wear gloves, eye protection and avoid contact with clothing. If in eyes, flush with water for several minutes. Get medical attention if irritation persists. If swallowed call a poison center or doctor for advice. The FastenMaster Deck Frame Coating contains no VOCs, solvents, and is non-flammable.